# nomadnet I2P auto import/disabled interface issues (linux ubuntu server)

_Help · started by oatmilk! on Fri, Nov 20, 2026 9:44 AM_

Tags: NomadNet, Help

---

## Original post

**oatmilk!** · Fri, Nov 20, 2026 9:44 AM

when being an idiot (yes i know lol) and having a i2p connection in your config file, while not having i2p or i2pd installed on the system (or maybe not running??), and then going to disable it through the nomadnet UI for interface management (and then going to restart your RNS system) RNS(d) (and nomadnet) will not open due to content not actually added by the user. 

i'll make a ledgeable bug report prollllyyy tmr afternoon, it's 4:30am and i need to get some sleep 


> [[Catz Node I2P]]
  type = I2PInterface
  enabled = yes
  peers = f77ptezksg4qr4rdike5t2kj3hh2oa7l7qmohqwow6uc6evzjjtq.b32.i2p

is what i put into the nomadnet through 
![image.png](/storage/forum/9PDEICH7nxEIw9wWW5KGPpQuCrSrxlJs3RlQiFoA.png)
![image.png](/storage/forum/DqhjyLWF9mWCLtEvnxyyCCyVQiVWnXCVaQfDAIxl.png)

when i added it, i had a I2P implementation installed(and running, but was unable to connect). i only removed I2P after restarting the first time to see if i could get a connection, and deemed i couldn't, and thus gave up.

after disabling it through [C-o] in nomadnet to try and come back to it later with a more rested brain. 
the lines that caused 
![image.png](/storage/forum/ig5R2WIWQ4bCbrBKJZ7DPHWG8AeNmni5JdF0POw9.png)
to happen were added 


unsure if this is intended behavior that lacks a sanity check, or an actual significant bug i found by being a dumbass

---

## Reply 1

**Mark** · Fri, Nov 20, 2026 12:33 PM

Ah! That is interesting. So if you actually pasted it just as above, with no other entries, there does seem to be a bug somewhere in the flow that adds the interface to the config file. It looks like it might have added it with `ifac_size = None`, which is not a valid config option (it has to be an integer), and therefore it errored out when you then started it later.

It's probably in the nomadnet config file write handling somewhere.

*Could* also add a check to the RNS config loading, but honestly I prefer for it to raise an error if there's something completely nonsensical in there, so users don't just end up running a config that is different from what they think.

---

## Reply 2

**oatmilk!** · Fri, Nov 20, 2026 7:09 PM

**Mark** wrote:
> [...]

can confirm, pasted as shown, and it probably added that line after i disabled the interface 

honestly my preferred behavior would be for it to notify of the error, and offer to remove the affected entry or comment it out or something

---
